Overview Lifts Disabled: Disabled lift the lifting platform, rails and drive boxes and other three major components; lifting platform is a C-type steel as the main components, the use of "self-resetting rocker switch operation and running," no pit installation, fixed directly to the concrete floor (under the bottomless pit outdoor applications, below the concrete floor platform not less than the surrounding ground), lift the floor drops can manually open the manual hydraulic valve; hydraulic drive, stable lifting Security, brushed stainless steel and aluminum electrostatic spray cabinet / panel, compact appearance, do not obstruct the surrounding environment. Disabled lift installed directly on the ground, without supporting civil pits, the construction is simple, easy to water outdoor product placement, rust, easy maintenance. Lifting height 1-6 meters! Drive system: hydraulic or screw driving operation: jog control / or automatic installation: no pit installation, fixed directly to the concrete floor outside the control device: Outbound boxes were placed on the device, the next stop layer near the wall, remote control can also be used an emergency stop: press the emergency button switch can control the machine operation. Manual operation: manual hydraulic valve is opened, or manually rotating the lifting screw can manually move the floor when dropped. Disabled lift safety devices: safety interlock: any abnormal operation, lifting platform can not run. Safety Edge: running safety edge obstacles encountered, is stopped immediately. Emergency lowering: no power or fault, manual lowering device. Manual security door: from the station platform, security doors manually lock, unlock the station manually. Security Key: special key control, someone specifically to deal with. Disabled lift configuration: Power 220V / 50HZ / 25A lifting plate size 1370mm (length) × 862mm (width) (available upon request) Minimum floor lifting height 65mm (from the ground) Maximum lift height 1500mm (from the ground) -6000mm (from ground) Lifting speed 30mm / s maximum load 300kg out in 90 ° or 180 ° shield in the form of 90 ° or 180 ° swap configuration platform floor panel pattern cleat security Rocker working angle 75 ° (rising tilt) Weight <400 kg drive system hydraulic power unit system control supply voltage 24V / DC motor 0.75kw 220V / AC or 110V / AC lift control rocker switch, run the self-resetting overload overcurrent relay control the work environment is suitable for indoor and outdoor work Temperature -20 ° C- 60 ° C Installation no pit installation (fixed directly to the concrete floor) Emergency stop pressing the emergency button switch can control the machine to run up or down manually operating the manual valve pressure relief safety net downward lift floor drops, the safety net in case obstacle stopped immediately